Build an MVP, Not a Beta

By Stephen Forte,

A lot of people misuse the term “MVP” or Minimum Viable Product. To be clear an MVP is not a beta, not a prototype, but rather an experiment designed to test your value proposition’s assumptions by measuring a behavior and learning from the results.

mind-v

Back in the day, Dropbox did an MVP as just a video and Buffer was just a landing page. Both were experiments to determine if Dropbox or Buffer should even exist. Instead of guessing and building prototypes, they built the simplest of things in order to measure a user’s behavior. Today startups are building functional prototypes and calling them MVPs. They are better off building something they can learn from. Typically the first MVP doesn’t even have to be anything on a device or computer. For example, I once advised a new travel startup that wanted to give you one click access to a daily itinerary based on a map. They assumed that people wanted a map with pin points on it and times to follow. I told them to go to tourist spots and give people real maps with real pin points circled and an analog itinerary to follow. That was an MVP, it was an experiment (map) that measured (how many as a percent of total) a user behavior (did they use the map or not). Let’s take a look at how to build a better MVP.

Getting Started: Customer Segment and Value Proposition

The whole idea of an MVP is to measure an actual result against your expected result to prove or disprove your assumption. In order to do that you need data. The first place to start is to think about is your customer segment; you have to know who your target customers are going to be. Without knowing your exact segment (22-34 year old professional, urban women, single, living alone, earning over $75k), you won’t be able get the correct pool of users to test on.

After you define your customer segment, you define your value proposition. Too many people think that their value proposition is just the solution to the problem they are solving. That is incorrect: your value proposition is the delta between the current solution or workaround to the problem people are currently using and your solution. You measure your value proposition in terms of how much better your solution is compared to the solutions that exist today.

Let’s say you are solving a problem for buying movie tickets. Several solutions already exist; there are lots of web sites, apps, etc. Maybe your solution involves buying the tickets via SMS. Regardless, you have to think about what the alternatives to your solution are and compare them against that. One is simply buying the ticket at the box office. Here your alternative has value, but not tremendous value. Alternatively, let’s say you are developing a life saving cancer drug. The alternative without your solution could be death. In this case your solution would be incredibly valuable.

The Assumptions That Fuel Your Value Proposition

Underpinning your value proposition are your core assumptions. These are the things that would compel someone to buy your product or service. The job of the MVP is to test those underlying assumptions. The only way to successfully test those assumptions is by making a prediction of the result and comparing the behaviors that you measured up against your predictions. Your predictions should be based in fact, facts that would determine if you have a viable business or not. If you don’t make a prediction, then you will not have a way to determine success or failure of the MVP test.

Let’s say you are building a landing page, Buffer style. Your MVP will be to measure how many people give you their email address after your landing page described your product. You will have to drive traffic to your landing page, most likely by taking out some Facebook or Google AdWords ads. You want to measure the conversion rate of people who clicked on the ad (since you pay for click) to providing their email addresses. For example, if 100 people clicked on the ad and came to your page, but only 4 provided their email address, your conversion rate is 4%. (Not bad actually in e-commerce.)

Should 4% be your target? No. You need to determine your prediction based on facts and your business model. Let’s say you estimate spending $100 on Google AdWords to drive traffic to your MVP. If you have a conversion rate of 4%, it will then cost you $25 to acquire each customer. $25 is your CAC or customer acquisition cost. You need to estimate what your Customer Lifetime Value (CLV), or the amount of profit you expect to get out of each customer over the course of their relationship with you, is. At this stage it will be fairly inaccurate, but you need to ground your assumption in reality. (Future MVPs can test pricing.) Let’s say you make the CLV to be $21, based on a lot of factors in your business model. (I talk more about your CLV and CVC here.)

With a a CLV of $21 and a CAC of $25, you will lose $4 on each new customer you acquire. Or CLV ($21) – CAC ($25) = -$4.

For your MVP test, you will need a higher conversion rate/lower CAC rate in order to make a profit. For the first MVP test make a prediction that the conversion rate will be 5%, bringing your CAC down to $20. Or CLV ($21) – CAC ($20) = $1.

Interpreting The Results

Now with your assumptions based in some business reality, it is time to run the test. Typically the results are one of the three following numbers (remember you are aiming for 5% conversion):

  • 0.021%
  • 4.28%
  • 17%

Let’s take 0.021%. This is an absolute failure, you can safely assume that your assumption is invalidated. Safest thing to do is declare the assumption invalid and go back to your value proposition and rethink it. If you have other assumptions associated with your value proposition, you can do some more MVP tests to determine if the entire value proposition is invalid or not. Chances are you will have to iterate your idea and value proposition some more.

What to do if you are at 4.28%? Technically it is invalid since you need 5% conversion rate in order to make any money. Should you just give up and go home? No. You should try some new UX and new design or different language and run the test again. Don’t run the test without changing anything! If your future tests with minor changes are at or over 5%, then you can declare your assumptions valid and move on to test the next one.

Let’s look at 17%. Woo-hoo, your assumptions are more than valid, you blew away your predictions. Verify that your test was fair and then declare your assumption valid and move on to test the next assumption.

Thats all there is to it! Only by clearly defining what success is and basing those numbers in a business reality is an MVP useful. Anything else is just a beta.

  Category: Startup Tips
  Comments: Comments Off on Build an MVP, Not a Beta